Plastic Quick Connect Adapter Two Way Splitter Y Pipe Fitting Drugs
Brief introduce :
With three 3/8" pores .
Usually used to connects 1/4 " PE pipeline , used Without Blind nut but three blue luck .
1 ) Usage : RO machine , water purifier , water treatment quick
2 ) Light weight , easy to load and unload
3 ) Good chemicals and drugs resistance
4 ) Small resistance to fluidity
5 ) Package : 50pcs /bag
|017 - A||1/4 " Tube O.D * 1/4 " Tube O.D * 1/4 " Tube O.D|
|017 - B||3/8 " Tube O.D * 3/8 " Tube O.D * 3/8 " Tube O.D|
|017 - C||3/8 " Tube O.D * 1/4 " Tube O.D * 1/4 " Tube O.D|
|017 - G||1/4 " Tube O.D * 3/8 " Tube O.D * 3/8 " Tube O.D|
This fitting is Y-shaped and has three openings to connect and
branch three pipes , two on the main run and one branch . Pipe
dimensions for tees are represented as A x B x C. "A" and "B"
indicate the main run on the fitting , and " C " indicates the
branch . It has female slip openings or " sockets " for sliding
over the ends of male unthreaded pipes . The slip ends connect to
pipes with a smooth bore for enhanced flow.
▪ tee with three openings for connecting and branching three pipe
▪ Slip openings for connecting to male unthreaded pipes or fitting
▪ PVC for corrosion resistance, high strength, and less weight than
fittings made from metal
Smooth interior finish for reduced friction and buildup of
The tested design allows users to connect the disconnect quick and
easy without the need of any others tools .Apllications include
potable liquids wuch as reverse osmosis drinking water ,beverage
dispensing ,coffee machine ,RV and Marine ,misting system,ice maker
and many more .
O - ring : EPDM
Collect - POM
Push - fit technoghy
Removable : Yes
For use with copper : Yes
For use with CPVC : Yes
Zero - leak connections
No tools tube inserts required
nlet Thread Type Compression / Push
Quick disconnection without other tools
Maximum Working Temperature : 44 F
Manimum Working Temperature : 44 F
Suitable for use in hot and cold water applications
Package : Plastic bag , 4000pcs per ctn
Payment : TT , 30% in advance , others paid off after get deposit
Shipment : Within 10days after get deposit
Tee joint with three pore : 1/4 " tube and 1/2 " internal thread ,
3/8 " external thread .
Connects 1/2" Tap water pipe , Pressure tank bulkhead and other Ro
water accessories like 1/2 " to 1/4 " RO fitting , 1/2 " to 3/8 " RO fitting etc .
Scope : 4g al / 11gal / RO water pressure tank .
Preparation for installation :
1 . Avoding hot feed water , hot water might damage the RO membrane
2 . The feed water pressure under 3 kg/cm2 (40 psi ) is
appropriated . Higher water pressure might cause system leaked or
3 . If water pressure is much higher then 3 kg/cm2 (40 psi ) ,please install the pressure - reducing valve or select the system
without boost pump .
4 . If water pressure lower then 3